Quelle/Werksbezeichnung: AA (US). US/Novelis Außenhaut-Legierung, höhere Festigkeit als 6016
| Designation | EN AW-6111 |
| Alternative designation | AlMg0.7Si0.9Cu |
| AISI / ASTM | AA6111 |
| Standard | EN 573-3 |
| Category | Aluminium-Knetlegierung AlMgSi (aushärtbar) |
| Material group (EN ISO) | 23.1 |
| Density | 2,71 g/cm³ |
| Magnetism | nein |
| Equivalent grades | AA6111,AC120 |
| Comparable standard grade | EN AW-6016 |
| Si | 0,70 – 1,10 |
| Fe | ≤ 0,40 |
| Cu | 0,50 – 0,90 |
| Mn | 0,15 – 0,45 |
| Mg | 0,50 – 1,00 |
| Cr | ≤ 0,10 |
| Zn | ≤ 0,15 |
| Ti | ≤ 0,10 |
| Yield strength Re (min) | 150 N/mm² |
| Tensile strength Rm | 260–320 N/mm² |
| Elongation at break A (min) | 22 % |
| Young's modulus | 70 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.
