02373 9382-0 DE /EN /PL
Dachbleche, Fassaden
Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 3.0505 |
| Designation | EN AW-3105 |
| Alternative designation | AlMn0.5Mg0.5 |
| Former designation | AlMn0.5Mg0.5 |
| AISI / ASTM | AA3105 |
| Standard | EN 573-3 |
| Category | Aluminium-Knetlegierung AlMn (nicht aushärtbar) |
| Material group (EN ISO) | 21.1 |
| Density | 2.72 g/cm³ |
| Magnetism | nein |
| Equivalent grades | AA3105,3.0505 |
| Comparable standard grade | EN AW-3003 |
| Si | ≤ 0.60 |
| Fe | ≤ 0.70 |
| Cu | ≤ 0.30 |
| Mn | 0.30 – 0.80 |
| Mg | 0.20 – 0.80 |
| Cr | ≤ 0.20 |
| Zn | ≤ 0.40 |
| Ti | ≤ 0.10 |
| Yield strength Re (min) | 40 N/mm² |
| Tensile strength Rm | 100–155 N/mm² |
| Elongation at break A (min) | 17 % |
| Hardness (Brinell HB, max) | ≤ 46 HB |
| Young's modulus | 69 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.