Fahrzeugbau, dekorative Anwendungen
Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 3.3525 |
| Designation | EN AW-5251 |
| Alternative designation | AlMg2Mn0.3 |
| Former designation | AlMg2Mn0.3 |
| AISI / ASTM | AA5251 |
| Standard | EN 573-3 |
| Category | Aluminium-Knetlegierung AlMg (nicht aushärtbar) |
| Material group (EN ISO) | 22.3 |
| Density | 2,69 g/cm³ |
| Magnetism | nein |
| Equivalent grades | AlMg2,AA5251,3.3525 |
| Comparable standard grade | EN AW-5052 |
| Si | ≤ 0,40 |
| Fe | ≤ 0,50 |
| Cu | ≤ 0,15 |
| Mn | 0,10 – 0,50 |
| Mg | 1,70 – 2,40 |
| Cr | ≤ 0,15 |
| Zn | ≤ 0,15 |
| Ti | ≤ 0,15 |
| Yield strength Re (min) | 60 N/mm² |
| Tensile strength Rm | 160–200 N/mm² |
| Elongation at break A (min) | 15 % |
| Hardness (Brinell HB, max) | ≤ 45 HB |
| Young's modulus | 70 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.
