Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 1.0395 |
| Designation | HC180B |
| Alternative designation | CR180BH |
| Standard | EN 10268 |
| Category | Bake-Hardening-Stahl · Term explained |
| Density | 7,85 g/cm³ |
| Magnetism | ja |
| Equivalent grades | HX180BD |
| Comparable standard grade | DC04 |
| C | ≤ 0,05 |
| Si | ≤ 0,50 |
| Mn | ≤ 0,70 |
| P | ≤ 0,06 |
| S | ≤ 0,03 |
| Al | ≥ 0,02 |
| Yield strength Re (min) | 180 N/mm² |
| Tensile strength Rm | 290–360 N/mm² |
| Elongation at break A (min) | 34 % |
| Young's modulus | 210 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.
