Marine, Druckbehälter
Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 3.3523 |
| Designation | EN AW-5052 |
| Alternative designation | AlMg2.5 |
| Former designation | AlMg2.5 |
| AISI / ASTM | AA5052 |
| Standard | EN 573-3 / EN 485-2 |
| Category | Aluminium-Knetlegierung AlMg (nicht aushärtbar) |
| Material group (EN ISO) | 22.4 |
| Density | 2,68 g/cm³ |
| Magnetism | nein |
| Equivalent grades | AlMg2.5,AA5052,3.3523 |
| Si | ≤ 0,25 |
| Fe | ≤ 0,40 |
| Cu | ≤ 0,10 |
| Mn | ≤ 0,10 |
| Mg | 2,20 – 2,80 |
| Cr | 0,15 – 0,35 |
| Zn | ≤ 0,10 |
| Yield strength Re (min) | 65 N/mm² |
| Tensile strength Rm | 170–215 N/mm² |
| Elongation at break A (min) | 16 % |
| Hardness (Brinell HB, max) | ≤ 47 HB |
| Young's modulus | 70 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.
