Reinaluminium, Tiefzieh-/Emaillierware, Reflektoren
Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 3.0255 |
| Designation | EN AW-1050A |
| Alternative designation | Al99.5 |
| Former designation | Al99.5 |
| AISI / ASTM | AA1050A |
| Common name | Reinaluminium 99,5 |
| Standard | EN 573-3 / EN 485-2 |
| Category | Reinaluminium |
| Material group (EN ISO) | 21.1 |
| Density | 2,7 g/cm³ |
| Magnetism | nein |
| Equivalent grades | Al99.5,AA1050,1050A,3.0255 |
| Si | ≤ 0,25 |
| Fe | ≤ 0,40 |
| Cu | ≤ 0,05 |
| Mn | ≤ 0,05 |
| Mg | ≤ 0,05 |
| Zn | ≤ 0,07 |
| Ti | ≤ 0,05 |
| Yield strength Re (min) | 20 N/mm² |
| Tensile strength Rm | 65–95 N/mm² |
| Elongation at break A (min) | 25 % |
| Hardness (Brinell HB, max) | ≤ 20 HB |
| Young's modulus | 69 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.
