02373 9382-0 DE /EN /PL
Presshärten: Werte nach Härtung
| Material number | 1.5530 |
| Designation | 20MNB5 |
| Former designation | 20MnB5 |
| Common name | PHS |
| Standard | EN 10083-3 |
| Category | Bor-Manganstahl (presshärtend) · Term explained |
| Density | 7.85 g/cm³ |
| Magnetism | ja |
| Equivalent grades | HDT1200M,MS-W1200,MART1200 |
| C | 0.17 – 0.23 |
| Si | ≤ 0.40 |
| Mn | 1.10 – 1.40 |
| P | ≤ 0.03 |
| S | ≤ 0.04 |
| Cr | ≤ 0.30 |
| B | 0.00 – 0.01 |
| Ti | ≤ 0.05 |
| Al | ≥ 0.02 |
| Yield strength Re (min) | 950 N/mm² |
| Tensile strength Rm | 1,200–1,400 N/mm² |
| Elongation at break A (min) | 6 % |
| Hardness (Brinell HB, max) | ≤ 460 HB |
| Young's modulus | 210 GPa |
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.