02373 9382-0 DE /EN /PL
Presshärten (PHS): Werte nach Härtung, Anlieferung ca. Re 350-450 MPa
Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 1.5528 |
| Designation | 22MNB5 |
| Former designation | 22MnB5 |
| Common name | PHS |
| Category | Bor-Manganstahl (presshärtend) · Term explained |
| Density | 7.85 g/cm³ |
| Magnetism | ja |
| Equivalent grades | HDT1500M,MS-W1500,MART1500,USIBOR1500,MBW1500,BTR165 |
| C | 0.20 – 0.25 |
| Si | ≤ 0.40 |
| Mn | 1.10 – 1.40 |
| P | ≤ 0.03 |
| S | ≤ 0.01 |
| Cr | 0.11 – 0.30 |
| B | 0.00 – 0.01 |
| Ti | 0.02 – 0.05 |
| Al | 0.02 – 0.06 |
| Yield strength Re (min) | 1,100 N/mm² |
| Tensile strength Rm | 1,500–1,700 N/mm² |
| Elongation at break A (min) | 5 % |
| Hardness (Brinell HB, max) | ≤ 490 HB |
| Young's modulus | 210 GPa |
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.