02373 9382-0 DE /EN /PL
Data sheet (manufacturer) ↗ External document from the respective manufacturer — not from INTEX.
| Material number | 1.0994 |
| Designation | HDT580F |
| Alternative designation | HR440Y580T-FB |
| Standard | EN 10338 |
| Category | Ferritisch-bainitischer Stahl (warmgewalzt) |
| Density | 7.85 g/cm³ |
| Magnetism | ja |
| Equivalent grades | HR60,FB590 |
| Comparable standard grade | S420MC |
| C | ≤ 0.18 |
| Si | ≤ 0.50 |
| Mn | ≤ 2.00 |
| P | ≤ 0.05 |
| S | ≤ 0.01 |
| Al | 0.02 – 2.00 |
| Nb+Ti | ≤ 0.15 |
| Cr+Mo | ≤ 1.00 |
| Yield strength Re (min) | 460 N/mm² |
| Tensile strength Rm | 580–700 N/mm² |
| Elongation at break A (min) | 14 % |
| Young's modulus | 210 GPa |
Grades from the same area — for comparing and browsing.
Coils, slit strip or sheets — tell us the dimensions and quantity, and we'll get back to you promptly.
All data without guarantee — no warranty as to accuracy or completeness. The mill test certificates and the relevant standards are authoritative.
We trade over 300 steels and know the sources. A short message is enough.